Skip to main content
NOVAManagement & Human Resources
All insights

Legal obligationHuman resources and talent

CNESST prevention program: what a business with 20 to 75 employees must do, and in what order

At 20 workers, Québec law requires a prevention program. The steps in order, the deadlines to meet and the minimum content, for businesses of 20 to 75 employees.

Artour Baiborodine · 7 min read

In any establishment employing at least 20 workers during the year, the employer must prepare and implement a prevention program (section 58 of the Act respecting occupational health and safety). Since October 1, 2025, the Regulation respecting prevention and participation mechanisms in an establishment sets the deadlines and terms (CNESST announcement, in French).

For a business with 20 to 75 employees, the hard part is not understanding the obligation. It is knowing where to start when nobody has “health and safety” in their job description. Here is the order we recommend, with what the law actually requires at each step.

First: are you covered, and for which establishment?

The threshold is calculated per establishment, not for the whole business. A 30-person head office and a 15-person warehouse, for example, are not in the same situation: the first needs a prevention program, the second an action plan (sections 61.1 and 61.2 of the Act). A business whose establishments carry out activities of the same nature may, however, choose a single program for all of them (section 58.1).

When counting, the CNESST includes full-time, part-time and occasional staff, interns and students with an employment contract, temporary foreign workers and agency workers. It excludes employer representatives such as managers, forepersons and supervisors (CNESST, counting workers, in French).

Step 1 — Set up the committee and the representative

Start with participation, not with the document. A health and safety committee must be established in any establishment employing at least 20 workers during the year (section 68). The committee determines the training and information programs within the prevention program and chooses the personal protective equipment (section 78). Building the program without it means building it twice.

  • How many workers’ representatives? Without an agreement, two for an establishment of 20 to 50 workers, three for 51 to 100 (section 7 of the regulation). Workers hold at least half the seats (CNESST, health and safety committee, in French).
  • How are they designated? Where there is no union, by vote, at a meeting called by a worker and announced at least five days in advance (section 13).
  • When does it meet? A first time within 30 days of its members being designated (section 18), then at least once a quarter: 4, 6 or 9 meetings a year depending on the establishment’s level (section 19). You can find your level with the CNESST’s online tool (in French).
  • And the health and safety representative? Designated from among the workers’ representatives on the committee (section 32).
  • Training. Each member, the representative included, must obtain a certificate for at least one day of training within 120 days of being designated (sections 31 and 34), or later under transitional deadlines that run until 2028 depending on the level (section 39). The representative’s registration, travel and living expenses are paid by the CNESST (section 91 of the Act).

Step 2 — Identify and analyze the risks

The program must provide for identifying and analyzing chemical, biological, physical, ergonomic and psychosocial risks, as well as safety risks, including those that particularly affect workers aged 16 and under. Psychosocial risks include risks related to sexual violence (section 59).

In a smaller business, this is rarely a scholarly study. A walk through the workstations with the committee, a review of the accidents and incidents of recent years, and a few direct questions to the team about workload, relationships and tension with customers already give a good picture. The CNESST offers a step-by-step approach to identify and analyze risks (in French).

Step 3 — Choose the measures, in the right order

For each risk, the program sets out the measures and action priorities that eliminate it or, failing that, control it, with a timeline (section 59). The regulation imposes an order of preference (section 6):

  1. eliminate the risk at the source;
  2. replace materials, processes or equipment to reduce the risk;
  3. install engineering controls, such as ventilation or a guard on a machine;
  4. make the risk visible with signals, such as an alarm or a warning light;
  5. apply administrative controls, such as training and safe work methods;
  6. provide personal or collective protective equipment, and make sure it is used and maintained properly.

In other words, training and protective equipment come last, not first. When a risk cannot be eliminated, it is controlled through a combination of these measures.

Step 4 — Plan how you will check

The program also sets out the monitoring, evaluation, maintenance and follow-up measures that ensure risks stay eliminated or controlled (section 59). The CNESST asks for at least one control measure per identified risk, with the person responsible and the frequency of checks written into the program (CNESST, content of the prevention program, in French).

This is the step that separates a living program from a binder: a name and a date next to every check.

Step 5 — Complete the mandatory components

The program must also provide for (section 59):

  • the personal protective equipment best suited to workers’ needs, chosen by the committee;
  • health and safety training and information programs, determined by the committee;
  • pre-employment and in-employment health examinations required by regulation, if any apply to your activities;
  • an up-to-date list of the hazardous materials used and the contaminants that may be emitted;
  • adequate first aid services;
  • your policy to prevent and manage situations of psychological harassment (section 81.19 of the Act respecting labour standards).

That last point often surprises people: the harassment policy forms an integral part of the program. Since 2024, it must contain seven specific elements; an older policy probably needs a review.

Step 6 — Send, implement, update

  • The deadline. The employer has one year from the moment it becomes subject to the requirement to prepare and implement its program, provided it maintains its action plan in the meantime; otherwise, it must do so without delay (section 4 of the regulation).
  • The committee. The program and every update are sent to it (section 60 of the Act).
  • Updates. Every year (section 5 of the regulation).
  • The CNESST. Every three years from implementation, the employer sends it its action priorities, the progress of the measures and their follow-up, on the prescribed form (section 60). As of mid-October 2026, the CNESST stated that this form was not yet available (CNESST, prevention program, in French). The CNESST may also, at any time, require the program or order changes to it (section 61).
  • If headcount drops. Below 20 workers, the program is maintained until December 31 of the following year (section 58).

The calendar at a glance

When What to do Source
The establishment reaches 20 workers Establish the committee and have the representatives designated Act, s. 68; regulation, ss. 7 and 13
Within 30 days of designation First committee meeting Regulation, s. 18
Within 120 days of designation, or by the transitional deadline Training for members and the representative Regulation, ss. 31, 34 and 39
No later than one year after becoming subject Prevention program implemented Regulation, s. 4
Every quarter At least one committee meeting Regulation, s. 19
Every year Program update Regulation, s. 5
Every three years Action priorities sent to the CNESST Act, s. 60

Your checklist

  • Count the workers in each establishment, using the CNESST’s method
  • Find each establishment’s level with the online tool
  • Have the workers’ representatives designated and name the employer’s
  • Hold the committee’s first meeting within 30 days
  • Register members and the representative for the required training
  • Identify and analyze the risks with the committee, psychosocial risks included
  • Rank the measures using the regulation’s hierarchy, each with an owner and a due date
  • Include the psychological harassment prevention policy
  • Send the program to the committee, then update it every year
  • Note the implementation date: the report to the CNESST comes back every three years

Going further

Has your establishment just crossed the threshold? Our page You are reaching 20 workers sums up what changes. And the first meeting, one hour at no charge, is where we establish where to start in your business.

Official sources

This article summarizes the Act and the regulation in force in October 2026. It is not legal advice: if in doubt, the text of the law prevails.

Let’s talk about your business

One hour, at no charge, in person or by video call.

First meeting, no charge